Kia Forte: Replacement

Second generation YD (2014-2018) / Kia Forte TD 2014-2018 Service Manual / Body (Interior and Exterior) / Fender / Replacement

•	Be careful not to damage the fender and body.

•	When removing the clips, use a clip remover.

1.	Remove the head lamps. (Refer to Body Electrical System - "Head Lamps")

2.	Remove the quarter fixed glass. (Refer to "Quarter Fixed Glass")

3.	Loosen the front wheel guard mounting clips and screws.

4.	After loosening the mounting screws, then remove the front bumper side mounting bracket (A).

5.	After loosening the mounting bolts and nut, then remove the fender assembly (A).

6.

Install in the reverse order of removal.

•	Replace any damaged clips.

Component Location

1. Fender assembly ...

Hood

...

See also:

Transaxle Control Module (TCM) Description
Transaxle Control Module (TCM) is the automatic transaxle's brain. The module receives and processes signals from various sensors and implements a wide range of transaxle controls to ensu ...

Air Cleaner Removal and Installation
1. Remove the engine cover. 2. Disconnect the battery negative terminal. 3. Remove the air duct (A). ...

35R Clutch Control Solenoid Valve(35R/C_VFS) Inspection
1. Turn ignition switch OFF. 2. Disconnect the Solenoid valve connector. 3. Measure resistance between sensor ...

Categories

Copyright © www.kifomanual.com 2014-2024