Filler-Neck Assembly Installation
1.
Install in the reverse order of removal.
Filler-neck assembly bracket
installation bolt :
7.8 ~ 11.8 N.m (0.8 ~ 1.2 kgf.m, 5.8 ...
Condenser Replacement
1.
Recover the refrigerant with a recovery/ recycling/ charging station.
2.
Disconnect the negative (-) battery terminal.
3 ...
Inspection
Component Inspection
1.
Remove the clutch switch.
(Refer to Clutch Switch - "Removal")
2.
Push the clutch switch in the di ...