Kia Forte: Specification - Back-up Lamp Switch - Manual Transaxle System - Kia Forte TD 2014-2018 Service ManualKia Forte: Specification

Second generation YD (2014-2018) / Kia Forte TD 2014-2018 Service Manual / Manual Transaxle System / Back-up Lamp Switch / Specification

Item
 Specification
Current voltage
13V
Working voltage
 DC 10~15V
Operating force
3.0kg Max
Voltage drop
-0.4V
Working temperature
-30°C ~ 100°C
[-30°F ~ 212°F]

Description
Component location : Manual transaxle case Operation principle : Back up lamp switch is pushed by the reverse lug sliding when select arm, and switches the back up lamp. Funct ...

Inspection
1. Remove the air cleaner assembly. (Refer to Engine Mechanical System - "Air Cleaner") 2. Remove the battery and battery tray ...

See also:

Troubleshooting
Vehicle inspection SYMPTOM CHART Symptom Suspect Area Remedy (See page) Squeak or grunt-noise from the front suspension, occurs more in cold ambient t ...

Refrigerant Recovery
Use only service equipment that is U.L-listed and is certified to meet the requirements of SAE J2210 to remove HFC-134a(R-134a) from the air conditioning system. ...

Windshield washers (front)
In the OFF position, pull the lever gently toward you to spray washer fluid on the windshield and to run the wipers 1-3 cycles. Use this function when the windshield is dirty. The spray and wip ...

Copyright www.kifomanual.com 2014-2026