Kia Forte: Specification
| Item |
Specification |
| Type |
Hall sensor |
| Working voltage |
6.5 ~1 5V |
| Output voltage |
VL ≤ 0.5 V (When output current is 15mA flows) |
Description
Component location : Manual transaxle
case
Operation principle : Vehicle Speed
Sensor (VSS) is hall sensor type and senses the rotating speed of differential
gear.
Function
...
Inspection
W/Harness Inspection
1.
Check the vehicle speed sensor by using the scan tool.
(if normal, current vehicle speed is display)
2.
Chec ...
See also:
Hub nut tightening sequence
Tighten the hub nuts as follows.
Tightening torque:
88.3 ~ 107.9N.m (9.0 ~ 11.0kgf.m, 65.1 ~ 79.6lb-ft)
...
General Inspection
After or before servicing the EPS system, perform the troubleshooting
and test procedure as follows. Compare the system condition with normal condition
in the table below and if abnormal symp ...
Injector Removal
1.
Turn the ignition switch OFF and disconnect the battery negative
(-) cable.
2.
Release the residual pressure in fuel line (Refer to the ...
Copyright © www.kifomanual.com 2014-2025