Kia Forte: Specifications
| Item |
Specification |
|
| Type |
Electric Power Steering System |
|
| Steering gear |
Type |
Rack & Pinion |
| Rack stroke |
150 ± 1mm (5.9055 ± 0.0393) |
|
| Steering angle (Max.) |
Inner |
39.6° (+0.5°/-1.5°) |
| Outer |
32.5° |
|
| Item |
Tightening torque (kgf.m) |
||
| Nm |
kgf.m |
lb-ft |
|
| Tire wheel hub nuts |
88.3 ~ 107.9 |
9.0 ~ 11.0 |
65.1 ~ 79.6 |
| Steering wheel lock nut |
39.2 ~ 49.0 |
4.0 ~ 5.0 |
28.9 ~ 36.2 |
| Steering column & universal joint |
49.0 ~ 58.8 |
5.0 ~ 6.0 |
36.2 ~ 43.4 |
| Steering column mounting nuts |
12.8 ~ 17.7 |
1.3 ~ 1.8 |
9.4 ~ 13.0 |
| Steering column mounting bolt |
44.1 ~ 49.0 |
4.5 ~ 5.0 |
32.5 ~ 36.2 |
| Bolt connecting universal joint to pinion |
32.4 ~ 38.3 |
3.3 ~ 3.8 |
23.9 ~ 27.5 |
| Tie rod end castle nut |
23.5 ~ 33.3 |
2.4 ~ 3.4 |
19.4 ~ 24.6 |
| Lower arm to front axle |
78.5 ~ 88.3 |
8.0 ~ 9.0 |
57.9 ~ 65.1 |
| Steering gear box to sub frame |
58.8 ~ 78.8 |
6.0 ~ 8.0 |
43.4 ~ 57.9 |
| Stabilizer link nut |
98.1 ~ 117.7 |
10.0 ~ 12.0 |
72.3 ~ 86.8 |
| Sub frame mounting bolts & nuts |
156.9 ~ 176.5 |
16.0 ~ 18.0 |
115.7 ~ 130.2 |
| Sub frame stay bolts |
44.1 ~ 53.9 |
4.5 ~ 5.5 |
32.5 ~ 39.8 |
Steering System
Special Service ToolsInput Speed Sensor Signal Waveform
Fig 1) Input/Output speed sensor at low speed
Fig 2) Input/Output speed sensor at high speed ...
Overhead Console Lamp Inspection
1.
Remove the overhead console lamp assembly then check for continuity
between terminals. If the continuity is not as specified, replace the
map lamp switch.
...
Crankshaft Damper Pulley Removal and Installation
1.
Remove the RH front wheel.
2.
Remove the drive belt.
(Refer to Timing System - "Drive Belt")
3.
...