Kia Forte: Tightening Torques
Second generation YD (2014-2018) / Kia Forte TD 2014-2018 Service Manual / Engine Electrical System / Tightening Torques
| Item |
N.m |
kgf.m |
lb-ft |
| Ignition coil installation bolt |
9.8 ~ 11.8 |
1.0 ~ 1.2 |
7.2 ~ 8.7 |
| Spark plug installation |
14.7 ~ 24.5 |
1.5 ~ 2.5 |
10.9 ~ 18.1 |
| Condenser bracket installation bolt |
9.8 ~ 11.8 |
1.0 ~ 1.2 |
7.2 ~ 8.7 |
| Alternator installation bolt [12 mm (0.47 in.)] |
21.6 ~ 32.4 |
2.2 ~ 3.3 |
15.9 ~ 23.9 |
| Alternator installation bolt [14 mm (0.55 in.)] |
29.4 ~ 41.2 |
3.0 ~ 4.2 |
21.7 ~ 30.4 |
| Battery (+) terminal tightening nut |
7.8 ~ 9.8 |
0.8 ~ 1.0 |
5.2 ~ 8.7 |
| Battery (-) terminal tightening nut |
3.9 ~ 5.9 |
0.4 ~ 0.6 |
2.9 ~ 4.3 |
| Battery mounting bracket bolt |
8.8 ~ 13.7 |
0.9 ~1.4 |
6.5 ~10.1 |
| Battery tray installation bolt |
8.8 ~13.7 |
0.9 ~1.4 |
6.5 ~10.1 |
| Battery sensor cable installation bolt |
10.8 ~13.7 |
1.1 ~ 1.4 |
8.0 ~10.1 |
| Starter installation bolt |
49.0 ~ 63.7 |
5.0 ~ 6.5 |
36.2 ~ 47.0 |
Specification
Ignition System
Ignition Coil
Item
Specification
Primary Coil Resistance (Ω)
0.75 ± 15％ [20°C (68°F)]
Secondary Coil Resis ...
Special Service Tools
Tool Name / Number
Illustration
Description
Alternator pulley remover wrench
09373-27000
Removal and installation of alternator pulley
...
See also:
Injector Removal
1.
Turn the ignition switch OFF and disconnect the battery negative
(-) cable.
2.
Release the residual pressure in fuel line (Refer to the ...
Rear Glass Defogger Printed Heater Inspection
Wrap tin foil around the end of the voltmeter test lead to prevent
damaging the heater line. Apply finger pressure on th ...
Water pump Inspection
1.
Check each part for cracks, damage or wear, and replace the coolant
pump assembly if necessary.
2.
Check the bearing for damage, abnorm ...
Copyright © www.kifomanual.com 2014-2025