Kia Forte: Tightening Torques
| Items |
N.m |
kgf.m |
lb-ft |
| Oil drain plug |
58.9 ~ 78.5 |
6.0 ~ 8.0 |
43.4 ~ 57.8 |
| Oil filler plug |
58.9 ~ 78.5 |
6.0 ~ 8.0 |
43.4 ~ 57.8 |
| Shift lever assembly mounting bolt |
8.8 ~ 13.7 |
0.9 ~ 1.4 |
6.5 ~ 10.1 |
| Control shaft assembly mounting bolt |
19.6 ~ 26.5 |
2.0 ~ 2.7 |
14.5 ~ 19.5 |
| Control cable bracket mounting bolt |
14.7 ~ 21.6 |
1.5 ~ 2.2 |
10.8 ~ 15.9 |
| Control cable retainer mounting nut |
11.8 ~ 14.7 |
1.2 ~ 1.5 |
8.7 ~ 10.8 |
| Back up lamp switch |
39.2 ~ 58.8 |
4.0 ~ 6.0 |
28.9 ~ 43.4 |
| Speed sensor mounting bolt |
4.9 ~ 6.9 |
0.5 ~ 0.7 |
3.6 ~ 5.1 |
| Transaxle support bracket mounting bolt |
58.9 ~ 78.5 |
6.0 ~ 8.0 |
43.4 ~ 57.8 |
| Transaxle mounting bracket bolt |
88.3 ~ 107.9 |
9.0 ~ 11.0 |
65.1 ~ 79.6 |
| Roll rod bracket mounting bolt |
49.0 ~ 63.7 |
5.0 ~ 6.5 |
36.2 ~ 47.0 |
| 107.9 ~ 127.5 |
11.0 ~ 13.0 |
79.6 ~ 94.1 |
|
| Starter mounting bolt |
49.0 ~ 63.7 |
5.0 ~ 6.5 |
36.2 ~ 47.0 |
| Transaxle upper mounting bolt (TM=>ENG) |
42.2 ~ 53.9 |
4.3 ~ 5.5 |
31.1 ~ 39.8 |
| Transaxle lower mounting bolt (ENG=>TM) |
42.2 ~ 48.1 |
4.3 ~ 4.9 |
31.1 ~ 35.4 |
| 42.2 ~ 53.9 |
4.3 ~ 5.5 |
31.1 ~ 39.8 |
Specifications
LubricantsParking Assist System Switch Installation
1.
Install the switchs and connect the switch connectors.
2.
Insatll the floor console assembly.
3.
Connect the ...
Inspection (With GDS)
1.
Check BCM input/output specification of multifunction switch using
the GDS. If the specification is abnormal, replace the lamp or wiper
switch.
...
Driving your vehicle
Be sure the exhaust system does not leak.
The exhaust system should be checked whenever the vehicle is raised to change
the oil or for any other purpose. If you hear a change in the sound of the exh ...