Kia Forte: Timing Chain Removal

Second generation YD (2014-2018) / Kia Forte TD 2014-2018 Service Manual / Engine Mechanical System / Timing System / Timing Chain Removal

1.	Remove the cylinder head cover. (Refer to Cylinder Head Assembly - "Cylinder Head Cover")

Set No.1 cylinder to TDC (Top dead center) on compression stroke.

(1)	Turn the crankshaft pulley and align its groove with the timing mark of the timing chain cover.

(2)

Check that the TDC marks of the intake and exhaust CVVT sprockets are in straight line on the cylinder head surface as shown in the illustration. If not, turn the crankshaft by one revolution (360°) more.

Do not turn the crankshaft pulley counterclockwise.

3.	Remove the timing chain cover. (Refer to Timing System - "Timing Chain Cover")

Remove the timing chain tensioner (A).

•	Reusing the removed tensioner is not recommended.

•	If you need to reuse the tensioner, push the plunger (A) as close to the tensioner as possible and then insert a stopper pin into the hole as shown below to keep the pluger in the retracted position.

5.	Remove the timing chain tensioner arm (A).

6.	Remove the timing chain (A).

7.	Remove the timing chain guide (A).

Timing Chain Components

1. Intake camshaft 2. Exhaust camshaft 3. Intake CVVT assembly 4. Exhaust CVVT assembly 5. Timing chain 6. Timing chain tensioner arm 7. Timing chain tensioner 8. T ...

Timing Chain Inspection

Sprockets, Chain Tensioner, Chain Guide, Chain Tensioner Arm 1. Check the CVVT sprocket and crankshaft sprocket for abnormal wear, cracks, or damage. Replace if necessa ...

Kia Forte: Timing Chain Removal

Timing Chain Components

Timing Chain Inspection

See also:

Categories