Symptom |
Suspect area |
Engine will not start or hard to start |
Vapor hose damaged or disconnected |
Engine hard to start |
Malfunction of the Purge Control Solenoid Valve |
Rough idle or engine stalls |
Vapor hose damaged or disconnected |
Malfunction of the PCV valve |
|
Rough idle |
Malfunction of the Evaporative Emission Control System |
Excessive oil consumption |
Positive crankcase ventilation line clogged |
Replacement
1.
Remove the cap (A) and remove the nuts, then remove the wiper
arm (B).
Tightening torque :
22.6~26.5 N.m(2.3~2.7 kgf.m, 16.6~19.5 ...
Injector Inspection
1.
Turn the ignition switch OFF.
2.
Disconnect the injector connector.
3.
Measure resistance between the inject ...
Components
1. Control shaft complete
2. Back-up lamp switch
3. Vehicle speed sensor
4. Transaxle housing
5. Transaxle case
...