Kia Forte: Variable Intake Solenoid (VIS) Valve Specification
Second generation YD (2014-2018) / Kia Forte TD 2014-2018 Service Manual / Engine Control / Fuel System / Engine Control System / Variable Intake Solenoid (VIS) Valve Specification
| Item |
Specification |
| Coil resistance (Ω) |
30.0 ~ 35.0 [20°C(68°F)] |
Variable Intake Solenoid (VIS) Valve Description
Variable Intake manifold Solenoid (VIS) valve is installed on the intake
manifold. The VIS valve controls the vacuum modulator which activates a valve
in the intake manifold. The ECM opens or ...
Variable Intake Solenoid (VIS) Valve Circuit Diagram
(M/T)
(A/T)
...
See also:
Accelerator Position Sensor (APS) Installation
1.
Install in the reverse order of removal.
Accelerator pedal module installation
nut:
12.8 ~ 15.7 N.m (1.3 ~ 1.6 kgf.m, 9.4 ~ 11. ...
Inspection
1.
After disconnecting the vapor hose from the PCV valve, remove
the PCV valve.
2.
Reconnect the PCV valve to the vapor hose.
...
Cruise Control Switch Component Location
1. Remote control switch(LH)
2. Remote control switch(RH)
3. Bluetooth hands free switch
4. Trip switch
...
Copyright © www.kifomanual.com 2014-2025