Kia Forte: What to do in an emergency

Certification label

The certification label is located on the driver's door sill at the center pillar. This label shows the maximum allowable weight of the fully loaded vehicle. This is called the GVWR (Gross V ...

Road warning

...

See also:

Drive Belt Tensioner Removal and Installation
1. Remove the drive belt. (Refer to Timing System - "Drive Belt") 2. Remove the alternator lower bolt (A). ...

Overdrive Clutch Control Solenoid Valve(OD/C_VFS) Description
Overdrive Clutch(OD/C) Control Solenoid Valve is attached to the valve body. This variable force solenoid valve directly controls the hydraulic pressure inside the Overdrive Clutch(OD/C) ...

Smart Key Unit Installation
Smart Key Unit 1. Install the smart key unit and RF receiver. 2. Connect the connector and install the smart key unit. ...