1. |
Turn ignition switch OFF.
|
2. |
Disconnect the Solenoid valve connector.
|
3. |
Measure resistance between sensor signal terminal and sensor ground
terminal.
|
4. |
Check that the resistance is within the specification.
(Refer to 35R Clutch Control Solenoid Valve - "Specifications")
|
System Overview
PAS(Parking Assist System) is an electronic driving aid device warning
driver to be cautious when they park or speed low after detecting an object
on side and behind of vehicle by using the f ...
Variable Charge Motion Actuator (VCMA) Description
The Variable Charge Motion Actuator (VCMA) is installed on the inlet of
the intake manifold.
It consists of a DC motor which actuates the VCM valve and a position
sensor which detects th ...
Special Service Tools
Tool(Number and Name)
Illustration
Use
Deployment tool
0957A-34100A
Airbag deployment tool.
Deployment adapter
0957A-3Q100
...