Kia Forte: 35R Clutch Control Solenoid Valve(35R/C_VFS) Removal
Second generation YD (2014-2018) / Kia Forte TD 2014-2018 Service Manual / Automatic Transaxle System / Automatic Transaxle Control System / 35R Clutch Control Solenoid Valve(35R/C_VFS) Removal
Replacing an on/off solenoid valve (SS-A, SS-B) does not require
additional hydraulic pressure adjustment; however, the hydraulic pressure
will need to be adjusted after replacing the VFS solenoid valve. If
replacing the VFS solenoid valve; also replace the valve body assembly.
(Refer to "Valve Body" in this group)
|
35R Clutch Control Solenoid Valve(35R/C_VFS) Inspection
1.
Turn ignition switch OFF.
2.
Disconnect the Solenoid valve connector.
3.
Measure resistance between sensor ...
Underdrive Brake Control Solenoid Valve(UD/B_VFS) Description
Underdrive Brake(UD/B) Control Solenoid is attached to the valve body.
This variable force solenoid valve directly controls the hydraulic pressure
inside the Underdrive Brake(UD/B).
...
See also:
Headlamp welcome
When the headlight(light switch in the headlight or AUTO position) is on and
all doors (and trunk/tailgate) are locked and closed, the headlight, position light
and tail light will come on for 1 ...
Room Lamp Removal
Room Lamp
1.
Disconnect the negative(-) battery terminal.
2.
Carefully remove the lamp lens (A) from the room lamp with a flat-tip
scre ...
Inspection
•
Frequent inhalation of brake pad dust, regardless of material
composition, could be ha ...
Copyright © www.kifomanual.com 2014-2024