1. |
Turn the ignition switch OFF and disconnect the negative (-) battery
cable.
|
2. |
Disconnect the accelerator position sensor connector (A).
|
3. |
Remove the installation bolt (B), the nuts (C) and then remove
the accelerator pedal module.
|
Variable Intake Solenoid(VIS) Actuator Removal and Installation
1.
Disconnect the vacuum hose (A).
2.
Remove the variable Intake solenoid (VIS) actuator (B)
Tightening torque :
...
Shift Lever Installation
1.
Install in the reverse order of removal.
•
...
Components Location
1. Radiator
2. Mounting insulator
3. Valve body cover
4. Oil cooler tube
5. Automatic transaxle
6. Radiator upper mounting bracket
1. Automatic tra ...