Kia Forte: Accelerator Position Sensor (APS) Description
Accelerator Position Sensor (APS) is installed on the accelerator pedal
module and detects the rotation angle of the accelerator pedal. The APS is one
of the most important sensors in engine control system, so it consists of the
two sensors which adapt individual sensor power and ground line. The second
sensor monitors the first sensor and its output voltage is half of the first
one. If the ratio of the sensor 1 and 2 is out of the range (approximately 1/2),
the diagnostic system judges that it is abnormal.
•
Install the component with the specified torques.
•
...
Accelerator
Position
Output Voltage (V)
APS1
APS2
C.T
0.7 ~ 0.8
0.29 ~ 0.46
W.O.T
3.85 ~ 4.35
1.93 ~ 2.18
...
See also:
General Features
•
This audio system supports Bluetooth® hands-free and stereo-headset
features.
-
HANDS-FREE feature: Making or receiving calls wirelessly.
...
DC/DC Converter Component Location
1. DC/DC Converter [200W]
...
Special Service Tools
Tool (Number and name)
Illustration
Use
09880-4F000
Hog ring clip installer
Hog ring clip installation
...