Kia Forte: Accelerator Position Sensor (APS) Inspection
Second generation YD (2014-2018) / Kia Forte TD 2014-2018 Service Manual / Engine Control / Fuel System / Engine Control System / Accelerator Position Sensor (APS) Inspection
| 1. |
Connect the GDS on the Data Link Connector (DLC).
|
| 2. |
Turn the ignition switch ON.
|
| 3. |
Measure the output voltage of the APS 1 and 2 at C.T and W.O.T.
|
Accelerator Position Sensor (APS) Circuit Diagram
(M/T)
(A/T)
...
Accelerator Position Sensor (APS) Removal
1.
Turn the ignition switch OFF and disconnect the negative (-) battery
cable.
2.
Disconnect the accelerator position sensor connector (A). ...
See also:
Output Speed Sensor Installation
1.
Install in the reverse order of removal.
After replacement or reinstal ...
Lubricants
Item
Specified lubricant
Quantity
Transaxle fluid
ATF SP-Ⅳ or equivalent
7.3L
(1.93 U.S gal., 7.71 U.S.qt., 6.42 Imp.qt ...
Telemetics Unit (TMU) Installation
1.
Install the MTS unit after connecting the cable and connector.
2.
Install the glove box housing.
3.
Connect ...
Copyright © www.kifomanual.com 2014-2024