Concentric Slave Cylinder Air Bleeding Procedure |
1. |
After disconnecting a cap from the concentric slave cylinder air
bleeder, insert a vinyl hose in the plug.
|
2. |
Refill the reservoir tank with the specified fluid.
|
3. |
Pump the clutch pedal about 10 times.
|
4. |
Loosen the air bleed screw (A) at hold down the clutch pedal to
allow air to escape from the clutch system. Then tighten the air bleed
screw.
|
5. |
Repeat the step 2 ~ 4 until there is no bubble in the fluid.
|
Storage compartment
These compartments can be used to store small items.
To avoid possible theft, do not leave valuables in the storage compartment. Always
keep the storage compartment covers closed while driving.
WAR ...
Removal
1.
Turn ignition switch OFF and disconnect the negative (-) battery
cable.
2.
Remove the battery (A) and ECM (B).
...
Assist Handle Replacement
•
Put on gloves to protect your hands.
&n ...