Kia Forte: Alternator Specification
Second generation YD (2014-2018) / Kia Forte TD 2014-2018 Service Manual / Engine Control / Fuel System / ISG (Idle Stop & Go) System / Alternator Specification
| Item |
Specification |
|
| Rated voltage |
13.5V, 120A |
|
| Speed in use |
1,000 ~ 18,000 rpm |
|
| Voltage regulator |
IC Regulator built-in type |
|
| Regulator Setting Voltage |
External mode |
Refer to below graph |
| Internal mode |
14.55 ± 0.3V |
|
| Temperature Gradient |
External mode |
0 ± 3 mV / °C |
| Internal mode |
-3.5 ± 2mV / °C |
|
※ Regulator Setting Voltage (External mode)
Alternator Description
The charging system included a battery, an alternator with a built-in
regulator, and the charging indicator light and wire.
The Alternator has eight built-in diodes, each rectifying AC curre ...
Alternator On-vehicle Inpection
•
Check that the battery cables are connected to the correct
terminals.
...
See also:
Battery replacement
A battery should last for several years, but if the transmitter or smart key
is not working properly, try replacing the battery with a new one. If you are unsure
how to use or replace the batter ...
Rear Oil Seal Components
1. Rear oil seal
...
Front Fog Lamps Removal
1.
Disconnect the negative(-) battery terminal.
2.
Remove the front bumper cover.
(Refer to Body - "Front Bumper Cover")
...
Copyright © www.kifomanual.com 2014-2024