Kia Forte: Ambient Temperature Sensor Description
Second generation YD (2014-2018) / Kia Forte TD 2014-2018 Service Manual / Heating,Ventilation, Air Conditioning / Air Conditioning System / Ambient Temperature Sensor Description
The ambient temperature sensor is located at the front of the condenser
and detects ambient air temperature. It is a negative type thermistor; resistance
will increase with lower temperature, and decrease with higher temperatures.
The sensor output will be used for discharge temperature control, temperature
regulation door control, blower motor level control, mix mode control and in-car
humidity control.
If the ambient temperature is below 0°C (32°F), the A/C compressor
will stop.
The compressor will operate manually.
|
Auto Defogging Sensor Replacement
1.
Disconnect the negative (-) battery terminal.
2.
Disconnect the sensor cover (A) and then remove the auto defogging
sensor (B).
...
Ambient Temperature Sensor Inspection
1.
Turn the ignition switch OFF.
2.
Disconnect ambient temperature sensor.
3.
Check the resistance of the ambie ...
See also:
Head Lamps Removal
1.
Disconnect the negative (-) battery terminal.
2.
Remove the front bumper cover.
(Refer to Body - "Front Bumper Cover")
...
Operation
Function Of Safety Power Window
When all door (Front, Rear) power window auto-up switch is operated, safety
function is activated.
1.
Safety function condition
...
Cylinder Block Inspection
1.
Remove gasket material.
Using a gasket scraper, remove all the gasket material from the
top surface of the cylinder block.
2.
Cl ...
Copyright © www.kifomanual.com 2014-2024