1. |
Turn the ignition switch OFF.
|
2. |
Disconnect ambient temperature sensor.
|
3. |
Check the resistance of the ambient temperature sensor between
terminals 1 and 2 whether it changes by changing the ambient temperature.
Specification
|
4. |
If the measured resistance is not within specification, substitute
with a known-good ambient temperature sensor and check for proper operation.
|
5. |
Replace the ambient temperature sensor if it is proved that there
is a problem with it.
|
Circuit Diagram
...
Injector Installation
•
Install the component with the specified torques.
•
...
Front Door Window Glass Replacement
1.
Remove the front door trim.
(Refer to Front Door - "Front Door Trim")
2.
Remove the front door belt inside weatherstrip (A ...