1. |
Turn the ignition switch OFF.
|
2. |
Disconnect the auto defogging connector.
|
3. |
Verify that the auto defogging actuator operates to the open position
when connecting 12V to the terminal 3 and grounding terminal 7.
Verify that the auto defogging actuator operates to the close
position when connecting in the reverse.
|
4. |
Connect the auto defogging actuator connector.
|
5. |
Turn the ignition switch ON.
|
6. |
Check the voltage between terminals 6 and 5.
Specification
It will feedback the current position of the actuator to the controls.
|
7. |
If the measured voltage is not within specification, substitute
with a known-good auto defogging actuator and check for proper operation.
|
8. |
Replace the auto defogging actuator if it is proved that there
is a problem with it.
|
Storage compartment
These compartments can be used to store small items.
To avoid possible theft, do not leave valuables in the storage compartment. Always
keep the storage compartment covers closed while driving.
WAR ...
Garment Hook Replacement
(2Door)
•
Put on gloves to protect your hands.
...
Specifications
Item
Specifications
Transaxle type
A6GF1
Engine model
Gasoline 1.8 MPI
Torque converter type
3-element, 1-stage, 2-phase type
...