1. |
Disconnect the negative (-) battery terminal.
|
2. |
Remove the glove box housing.
(Refer to Body -"Glove Box Housing")
|
3. |
Remove the passenger's side shower duct by loosening the screw.
|
4. |
Disconnect the connector (A) and then remove the auto defogging
actuator (B) after loosening the mounting screws.
|
5. |
Install in the reverse order of removal.
|
Spark Plug Removal
1.
Remove the ignition coil.
(Refer to Ignition System - "Ignition Coil")
2.
Using a spark plug wrench, remove the spark plu ...
Components
...
Components
Input/Output Specification
IMS input/output pin information
No.
Signal Name
I/O
Contents
Remark
A1
-
-
-
...