Kia Forte: Auto Defogging Sensor Replacement
Second generation YD (2014-2018) / Kia Forte TD 2014-2018 Service Manual / Heating,Ventilation, Air Conditioning / Air Conditioning System / Auto Defogging Sensor Replacement
| 1. |
Disconnect the negative (-) battery terminal.
|
| 2. |
Disconnect the sensor cover (A) and then remove the auto defogging
sensor (B).
|
| 3. |
Install in the reverse order of removal.
|
Auto Defogging Sensor Description
The auto defogging sensor is installed on the front windshield glass.
The auto defogging sensorr senses moisture on the windshild. The air conditioner
control module receives the signal from ...
Ambient Temperature Sensor Description
The ambient temperature sensor is located at the front of the condenser
and detects ambient air temperature. It is a negative type thermistor; resistance
will increase with lower temperature, ...
See also:
Cruise Control Switch Installation
1.
Reassemble the cruise control switch after connecting the connector.
2.
Reassemble the driver airbag module.
...
Glove Box Housing Component Location
1. Glove box housing
...
Copyright © www.kifomanual.com 2014-2024