Kia Forte: Auto Head Lamp Leveling Unit Description

According to driving environment and loading state of vehicle, head lamp lighting direction is changed to keep the driver's visibility range and to protect the driver's vision from glare, aiming at safety driving.

Sensor integrated ECU mounting on the rear center arm drives the actuator mounting on the head lamp since sensing the input signal following the vehicle's statically changes.

Head lamp beam is automatically operated by chassis tilt.

Auto Head Lamp Leveling Unit Circuit Diagram

...

Auto Head Lamp Leveling Unit Operation

Operating Procedure 1. Suspension angle change resulted from vehicle's load change. 2. Sensor angle change. 3. ...

See also:

Removal
   Handle the sensor with care. 1. Remove the tire. (Refer to Tire/Wheels - "Tire& ...

Oil Pump Description
The oil pump is built-in as a single unit with the 26 Brake chamber. Rotation of the pump builds the hydraulic pressure needed for the lubrication of the various parts of the transaxle and op ...

Back up lamp, Rear fog lamp
1. Take the lamp assembly out. 2. Remove the socket from the assembly by turning the socket counterclockwise until the tabs on the socket align with the slots on the assembly. 3. Remove the bulb by ...