1. |
Disconnect the battery terminals (A).
|
2. |
Remove the air duct and air cleaner assembly.
(Refer to Engine Mechanical System - "Air Cleaner")
|
3. |
Remove the battery insulation pad.
|
4. |
Remove the battery (A) after removing the mounting bracket.
|
5. |
Remove the ECM.
(Refer to Engine Control/Fuel System - “Engine Control Module
(ECM)”)
|
6. |
Remove the battery tray (A) after removing the bolts.
|
Oil Pressure Switch Removal and Installation
1.
Disconnect the oil pressure switch connector (A) and then remove
the oil pressure switch (B).
Tightening torque :
9.8 ~ 11.8N.m (1 ...
Inspection
Front Door Lock Module Inspection
1.
Remove the front door trim.
(Refer to Body - "Front Door Trim")
2.
Remove the front d ...
Component Location
1. Auto light sensor
2. Head lamps
3. Lighting switch (Auto)
4. Tail lamps
5. Body control module (BCM)
...