1. |
Disconnect the battery negative (-) cable.
|
2. |
Disconnect the battery sensor connector (A).
|
3. |
Remove the battery negative (-) cable after removing the bolt
(B).
|
Maintenance service
You should exercise the utmost care to prevent damage to your vehicle and injury
to yourself whenever performing any maintenance or inspection procedures.
Should you have any doubts concerning the i ...
Front Hub / Knuckle Installation
1.
Install in the reverse order of removal.
Use a SST (09581-11000) when ...
Mode Control Actuator Replacement
1.
Disconnect the negative (-) battery terminal.
2.
Remove the crash pad lower panel.
(Refer to Body -"Crash Pad Lower Panel") ...