1. |
The body control module can diagnose by using the GDS more quickly.
The BCM communicates with the GDS and then reads the input/output
value and drives the actuator.
|
2. |
To diagnose the BCM function, select the menu of model and body
control module.
|
3. |
Select "Input/output monitoring", if you will check current data
of body network system. It provides input/output status of each module.
|
4. |
If you will check each module data operation forcefully, select
"Actuation test".
|
5. |
If you want to change user option, select “user option”.
|
ETC (Electronic Throttle Control) System Schematic Diagram
...
Interior
Interior A
* These dimensions indicated in this figure are
actual-measurement dimensions. [ Unit : mm (inch) ]
Interior B
* These dimens ...
Checking the washer fluid level
Check the fluid level in the washer fluid reservoir and add fluid if necessary.
Plain water may be used if washer fluid is not available.
However, use washer solvent with antifreeze characterist ...