Kia Forte: Blower Motor Replacement
Second generation YD (2014-2018) / Kia Forte TD 2014-2018 Service Manual / Heating,Ventilation, Air Conditioning / Blower / Blower Motor Replacement
| 1. |
Disconnect the negative (-) battery terminal.
|
| 2. |
Disconnect the connector (A) of the blower motor.
|
| 3. |
Remove the blower motor (B) after loosening the mounting screws.
|
| 4. |
Install in the reverse order of removal.
|
Blower Motor Inspection
1.
Connect the battery voltage and check the blower motor rotation.
2.
If the blower motor voltage does not operate well, substitute
...
Power Mosfet Inspection
1.
Turn the ignition switch ON.
2.
Manually operate the control switch and measure the voltage of
the blower motor.
3. ...
See also:
DC/DC Converter Removal
1.
Disconnect the battery negative (-) cable.
2.
Remove the crash pad lower panel.
(Refer to Body - Crash pad lower panel.)
...
Overhead Console Lamp Removal
1.
Disconnect the negative (-) battery terminal.
2.
Loosen 2 screws holding the overhead console (A).
3.
...
Purge Control Solenoid Valve (PCSV) Installation
•
Install the component with the specified torques.
•
...
Copyright © www.kifomanual.com 2014-2024