Kia Forte: Blower Resistor Inspection
Second generation YD (2014-2018) / Kia Forte TD 2014-2018 Service Manual / Heating,Ventilation, Air Conditioning / Blower / Blower Resistor Inspection
| 1. |
Measure terminal-to-terminal resistance of the blower resistor.
|
| 2. |
If the measured resistance is not within specification, the blower
resistor must be replaced. (After removing the resistor)
|
Power Mosfet Replacement
1.
Disconnect the negative (-) battery terminal.
2.
Disconnect the power mosfet connector (A) and then remove the
power mosfet (B) after lo ...
Blower Resistor Replacement
1.
Disconnect the negative (-) battery terminal.
2.
Disconnect the blower resistor connector (A) and then remove the
blower resistor (B) af ...
See also:
Oil Pump Components
1. Inner roter
2. Outer roter
3. Oil pump cover
4. Relief plunger
5. Relief spring
6. Relief plug
7. O-ring (suction side)
8. O-ring (discharge side)
...
Sunvisor Replacement
•
Put on gloves to protect your hands.
&n ...
Front Wiper Motor Component Location
1. Cap
2. Nut
3. Wiper arm & blade
4. Retainer
5. Cowl top cover
6. Bolt
7. Wiper motor & linkage assembly
...
Copyright © www.kifomanual.com 2014-2024