Kia Forte: Blower Resistor Replacement
Second generation YD (2014-2018) / Kia Forte TD 2014-2018 Service Manual / Heating,Ventilation, Air Conditioning / Blower / Blower Resistor Replacement
| 1. |
Disconnect the negative (-) battery terminal.
|
| 2. |
Disconnect the blower resistor connector (A) and then remove the
blower resistor (B) after loosening the mounting screws.
|
| 3. |
Install in the reverse order of removal.
|
Blower Resistor Inspection
1.
Measure terminal-to-terminal resistance of the blower resistor.
2.
If the measured resistance is not within specification, the blower
re ...
Climate Control Air Filter Description
The climate control air filter is located in the blower unit. It eliminates
foreign materials and odor. The particle filter performs a role as an odor filter
as well as a conventional dust fi ...
See also:
Cruise Control Switch Circuit Diagram
...
Front Seat Back Cover Component Location
1. Front seat back cover
...
Seat Heater Switch Removal
Driver/Passenger Seat
1.
Disconnect the negative (-) battery terminal.
2.
Remove the floor console assembly.
(Refer to Body - " ...
Copyright © www.kifomanual.com 2014-2024