Kia Forte: Camshaft Position Sensor (CMPS) Removal
Second generation YD (2014-2018) / Kia Forte TD 2014-2018 Service Manual / Engine Control / Fuel System / Engine Control System / Camshaft Position Sensor (CMPS) Removal
|
| [Bank 1 / Intake] |
| 1. |
Turn the ignition switch OFF and disconnect the battery negative
(-) cable.
|
| 2. |
Disconnect the camshaft position sensor connector (B) after removing
the clip (A).
|
| 3. |
Remove the installation bolt (C), and then remove the sensor.
|
| [Bank 1 / Exhaust] |
| 1. |
Turn the ignition switch OFF and disconnect the battery negative
(-) cable.
|
| 2. |
Disconnect the camshaft position sensor connector (B) after removing
the clip (A).
|
| 3. |
Remove the installation bolt (C), and then remove the sensor.
|
Camshaft Position Sensor (CMPS) Inspection
1.
Check the signal waveform of the CMPS and CKPS using the GDS.
Specification:
Refer to “Wave Form”
...
Camshaft Position Sensor (CMPS) Installation
•
Install the component with the specified torques.
•
...
See also:
Refrigerant Line Replacement
1.
Discharge refrigerant from refrigeration system.
2.
Replace faulty tube or hose.
...
Multimedia Jack Description
The multimedia jack on the console upper cover is for customers who like
to listen to external portable music players like the MP3, iPod and etc., through
the vehicle's sound system when ...
G-Sensor Calibration
1.
Ignition "OFF", connect GDS.
2.
Ignition "ON" & Engine "OFF" select vehicle name and ESC system.
...
Copyright © www.kifomanual.com 2014-2024