Kia Forte: Canister Close Valve (CCV) Removal
Second generation YD (2014-2018) / Kia Forte TD 2014-2018 Service Manual / Engine Control / Fuel System / Engine Control System / Canister Close Valve (CCV) Removal
| 1. |
Turn the ignition switch OFF and disconnect the battery negative
(-) cable.
|
| 2. |
Lift the vehicle.
|
| 3. |
Disconnect the canister close valve connector (A).
|
| 4. |
Disconnect the ventilation hose (B).
|
| 5. |
Remove the fuel tank air filter after removing the mounting bolts
(C).
|
| 6. |
Release the lever (A), and then separate the canister close valve
(B) from the fuel tank air filter after rotating it in the direction
of the arrow in the figure.
|
Canister Close Valve (CCV) Inspection
1.
Turn the ignition switch OFF.
2.
Disconnect the CCV connector.
3.
Measure resistance between the CCV termina ...
Canister Close Valve (CCV) Installation
•
Install the component with the specified torques.
•
...
See also:
Canister Close Valve (CCV) Installation
•
Install the component with the specified torques.
•
...
Removal
1.
Turn ignition switch OFF and disconnect the negative (-) battery
cable.
2.
Remove the smart junction box
(Refer to Body Electri ...
Installation
1.
Remove the ignition key from the vehicle.
2.
Disconnect the battery negative cable from battery and wait for
at least thirty seconds bef ...
Copyright © www.kifomanual.com 2014-2024