Kia Forte: Canister Close Valve (CCV) Specification
Second generation YD (2014-2018) / Kia Forte TD 2014-2018 Service Manual / Engine Control / Fuel System / Engine Control System / Canister Close Valve (CCV) Specification
| Item |
Specification |
| Coil Resistance (Ω) |
19.5 ~ 22.5 [20°C(68°F) |
Canister Close Valve (CCV) Description
Canister Close Valve (CCV) is normally open and is installed on the canister
ventilation line. It seals evaporative emission control system by shutting the
canister from the atmosphere during ...
Canister Close Valve (CCV) Circuit Diagram
(M/T)
(A/T)
...
See also:
Hands Free Mic Inspection
1.
Disconnect the negative(-) battery terminal.
2.
Remove the handsfree mic (A) after disconnect the connector from
roof trim.
...
Specification
Item
Specification
Type
Hall sensor
Working voltage
6.5 ~1 5V
Output voltage
VL ≤ 0.5 V
(When output cu ...
Overhead Console Lamp Inspection
1.
Remove the overhead console lamp assembly then check for continuity
between terminals. If the continuity is not as specified, replace the
map lamp switch.
...
Copyright © www.kifomanual.com 2014-2024