Kia Forte: Cluster Fascia Panel Replacement

Second generation YD (2014-2018) / Kia Forte TD 2014-2018 Service Manual / Body (Interior and Exterior) / Crash Pad / Cluster Fascia Panel Replacement

•	Put on gloves to protect your hands.

•	When prying with a flat-tip screwdriver, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage.

•	Use a plastic panel removal tool to remove interior trim pieces to protect from marring the surface.

•	Take care not to bend or scratch the trim and panels.

1.	Using a screwdriver or remover, remove the center garnish [LH] (A).

2.	Using a screwdriver or remover, remove the cluster fascia panel (A).

3.	Disconnect the start/stop button connector (A).

4.

Install in the reverse order of removal.

•	Make sure the connector are connected in properly.

•	Replace any damaged clips.

Cluster Fascia Panel Component Location

1. Cluster fascia panel ...

Center Fascia Panel Component Location

1. Center fascia panel ...

See also:

Installation
Sensor Fit • Handle the sensor with care. • ...

Power Mosfet Inspection
1. Turn the ignition switch ON. 2. Manually operate the control switch and measure the voltage of the blower motor. 3. ...

Cowl Cross Bar Assembly Replacement
• Put on gloves to protect your hands. &n ...

Categories

Copyright © www.kifomanual.com 2014-2024