Kia Forte: Component Location
| [Engine Room] |
| 1. Receiver Drier 2. Condenser 3. Ambient Temperature Sensor 4. Compressor 5. Discharge Hose |
6. Suction & Liquid Tube Assembly 7. Service Port (High Pressure) 8. Service Port (Low Pressure) 9. A/C Pressure Transducer (APT) 10. Expansion Valve |
| [Interior] |
| 1. Auto Defogging Sensor 2. Photo Sensor 3. Heater & A/C Controller (Manaul) 4. Heater & A/C Controller (DATC) |
5. Incar Sensor 6. Heater & Blower Unit 7. Evaporator Temperature Sensor 8. Cluster Ionizer |
Refrigerant Recovery
Use only service equipment that is U.L-listed and is certified to meet
the requirements of SAE J2210 to remove HFC-134a(R-134a) from the air conditioning
system.
...
Compressor Oil Specification
1.
The R-134a system requires synthetic compressor oil (PAG) whereas
the R-12 system requires mineral compressor oil. The two oils must never
be mixed.
...
See also:
Control Shaft Complete Description
Component location : Control shaft
assembly is mounted on the top of the manual transaxle
Function : Change the gear by shifting
a shift lever. ...
Air Cleaner Removal and Installation
1.
Remove the engine cover.
2.
Disconnect the battery negative terminal.
3.
Remove the air duct (A).
...
Adjustment
Clutch Release Cylinder Air Bleeding
Procedure
•
Use the specified fluid. Avoi ...
Copyright © www.kifomanual.com 2014-2024