Before doing any SRS repairs, use the GDS Pro to check for DTCs.
Refer to the Diagnostic Trouble Code list for repairing of the related
DTCs.
|
- |
SRSCM
|
- |
Deployed airbag(s)
|
- |
Seat belt pretensioner(s)
|
- |
Anchor pretensioner(s)
|
- |
Front impact sensors
|
- |
SRS wiring harnesses
|
- |
Inspect the clock spring for heat damage.
If any damage found, replace the clock spring.
|
- |
SRSCM
|
- |
Deployed airbag(s)
|
- |
Side impact sensor(s) for the deployed side(s)
|
- |
SRS wiring harnesses
|
- |
Turn the ignition switch ON; the SRS indicator should come on
for about six seconds and then go off.
|
Engine start/stop button
Illuminated ENGINE START/STOP button
Whenever the front door is opened, the ENGINE START/STOP button will illuminate
for your convenience.
The light will go off after about 30 seconds after the ...
Cylinder Head Disassembly
Identify, valves and valve springs as they are removed so that
each item can be reinstalled in its original position.
...
Removal
1.
Turn ignition switch OFF and disconnect the negative (-) battery
cable.
2.
Remove the battery (A) and ECM (B).
...