Kia Forte: Components Location
| 1. Purge Control Solenoid Valve (PCSV) 2. Vapor line 3. ORVR valve 4. Fuel tank air filter |
5. Canister Close Valve (CCV) 6. Canister 7. Fuel Tank Pressure Sensor (FTPS) |
Schematic Diagram
Canister
The Canister is filled with charcoal and absorbs evaporated fuel vapor
from the fuel tank. The gathered fuel vapor in canister is drawn into the intake
manifold by the ECM/PC ...
Inspection
[EVAP. Leakage Test]
1.
Select "Evap. Leakage Test".
2.
Proceed with the test according to the screen introductio ...
See also:
Front Washer Motor Installation
1.
Install the washer reservoir.
Before installing the pump motor, check ...
Compressor Oil Specification
1.
The R-134a system requires synthetic compressor oil (PAG) whereas
the R-12 system requires mineral compressor oil. The two oils must never
be mixed.
...
Cluster Ionizer Description
The cluster ionizer helps clean odor in the vehicle or from the air-conditioner
system.
When the ignition switch is ON, the inoizer runs a "CLEAN" mode and then
a "ION" ...
Copyright © www.kifomanual.com 2014-2024