Kia Forte: Components Location - Engine Control System - Engine Control / Fuel System - Kia Forte TD 2014-2018 Service ManualKia Forte: Components Location

Second generation YD (2014-2018) / Kia Forte TD 2014-2018 Service Manual / Engine Control / Fuel System / Engine Control System / Components Location

1. Engine Control Module (ECM)
2. Manifold Absolute Pressure Sensor (MAPS)
3. Intake Air Temperature Sensor (IATS)
4. Engine Coolant Temperature Sensor (ECTS)
5. Throttle Position Sensor (TPS) [integrated into ETC Module]
6. Crankshaft Position Sensor (CKPS)
7. Camshaft Position Sensor (CMPS) [Bank 1 / Intake]
8. Camshaft Position Sensor (CMPS) [Bank 1 / Exhaust]
9. Knock Sensor (KS)
10. Heated Oxygen Sensor (HO2S) [Bank 1 / Sensor 1]
11. Heated Oxygen Sensor (HO2S) [Bank 1 / Sensor 2]
12. Accelerator Position Sensor (APS)
13. Fuel Tank Pressure Sensor (FTPS)
14. Fuel Level Sender (FLS)
15. A/C Pressure Transducer (APT)
16. ETC Motor [integrated into ETC Module]
17. Injector
18. Purge Control Solenoid Valve (PCSV)
19. CVVT Oil Control Valve (OCV) [Bank 1 / Intake]
20. CVVT Oil Control Valve (OCV) [Bank 1 / Exhaust]
21. Variable Intake Solenoid (VIS) Valve
22. Variable Charge Motion Actuator (VCMA)
23. Canister Close Valve (CCV)
24. Ignition Coil
25. Main Relay
26. Fuel Pump Relay
27. Data Link Connector (DLC) [16-Pin]
28. Multi-Purpose Check Connector [20-Pin]

1. Engine Control Module (ECM)
2. Manifold Absolute Pressure Sensor (MAPS)
3. Intake Air Temperature Sensor (IATS)

4. Engine Coolant Temperature Sensor (ECTS)
5. Throttle Position Sensor (TPS)
16. ETC Motor

6. Crankshaft Position Sensor (CKPS)
7. Camshaft Position Sensor (CMPS) [Bank 1 / Intake]
8. Camshaft Position Sensor (CMPS) [Bank 1 / Exhaust]

9. Knock Sensor (KS)
10. Heated Oxygen Sensor (HO2S) [SULEV]
11. Heated Oxygen Sensor (HO2S) [SULEV]

10. Heated Oxygen Sensor (HO2S) [Bank 1/Sensor 1] [LEV2]
11. Heated Oxygen Sensor (HO2S) [Bank 1/Sensor 2] [LEV2]

12. Accelerator Position Sensor (APS)
13. Fuel Tank Pressure Sensor (FTPS)

14. Fuel Level Sensor (FLS)
15. A/C Pressure Transducer (APT)

17. Injector
24. Ignition Coil
18. Purge Control Solenoid Valve (PCSV)

19. CVVT Oil Control Valve (OCV) [Bank 1 / Intake]
20. CVVT Oil Control Valve (OCV) [Bank 1 / Exhaust]

21. Variable Intake Solenoid (VIS) Valve
22. Variable Charge Motion Actuator (VCMA)

23. Canister Close Valve (CCV)
25. Main Relay
26. Fuel Pump Relay

27. Data Link Connector (DLC) [16-Pin]
28. Multi-Purpose Check Connector [20-Pin]


OBD-II review
1. Overview The California Air Resources Board (CARB) began regulation of On Board Diagnostics (OBD) for vehicles sold in California beginning with the 1988 model year. The first phase, O ...

ECM Terminal And Input/Output signal (M/T)
ECM Terminal Function Connector [CNG-MA] Pin No. Description Connected to 1 Ignition Coil (Cylinder #1) control output Ignition Co ...

See also:

Operation
1. General Function A. Auto-learn takes place only once per Ignition cycle. B. On successful compl ...

Air Ventilation Seat Unit Description
The ventilated seat system uses a Push method to cool the seat. A blower mounted in the seat generates the cool air, which then travels through ducts to the seat back and cushion. ...

Disaseembly
1. Loosen the screw (A-3ea) and then remove the lower cover (B) from the steering wheel body. Tightening torque : 7.8 ~ 11.8 N.m(0.8 ...

Copyright www.kifomanual.com 2014-2026