If the there is lack of power, excessive oil consumption or poor
fuel economy, measure the compression pressure.
|
1. |
Warm up and stop engine.
Allow the engine to warm up to normal operating temperature.
|
2. |
Disconnect the injector connectors (A).
|
3. |
Remove spark plugs.
(Refer to Engine Electrical System - "Spark Plug")
|
4. |
Check cylinder compression pressure.
|
5. |
Install the other parts reverse order of removal.
|
6. |
Some DTCs may exist after the inspection test and may need to
be manually cleared with GDS.
|
Spark Plug Inspection
[On vehicle inspection]
1.
Accelerate the engine to about 3,000 rpm 3 times or more.
2.
Remove the spark plug.
...
Specifications
Item
Specifications
Working voltage
DC 12V
Operating force
9.8 ± 2.9N
(1.0 ± 0.3kg, 7.2 ± 0.7lb)
Voltage drop
-0.4V
...
Engine Coolant Temperature Sensor (ECTS) Installation
•
Install the component with the specified torques.
•
...