1. |
Recover the refrigerant with a recovery/ recycling/ charging station.
|
2. |
Disconnect the negative (-) battery terminal.
|
3. |
Remove the front bumper cover.
(Refer to Body - "Front Bumper Cover")
|
4. |
Remove the discharge line (A) and liquid line (B) from the condenser.
|
5. |
Remove the air guard (A).
|
6. |
Remove the intake air duct (A).
|
7. |
Remove the radiator upper bracket (B) loosening the radiator mounting
bolts (A).
|
8. |
Loosen the mounting bolts and then remove the radiator upper bracket
(A).
|
9. |
Remove the condenser (A) from radiator.
|
10. |
Install in the reverse order of removal.
|
Control Cable Components
1. Shift lever knob
2. Shift lever assembly
3. Shift cable assembly
4. Select cable assembly
5. Retainer
...
Troubleshooting
Ignition System
Symptom
Suspect Area
Remedy
Engine will not start or is hard to
start (Cranks OK)
Ignition lock switch
Inspect ignitio ...
Inspection
1.
Check the bushing for wear.
2.
Check the brake pedal for bending or twisting.
3.
Check the brake pedal retur ...