Select cable adjustment |
1. |
Remove the select cable snap pin (A) and then remove the select
cable (B) from the shift lever pin.
|
2. |
Shift the shift lever to 3rd gear.
|
3. |
Move the slide clip (B) of guide member (A) in the direction as
shown in the illustration.
|
4. |
Install the select cable (A).
|
5. |
Insert the slide clip in the direction as shown in the illustration
and then install the snap pin (A).
|
Fuel Sender Removal
1.
Remove the fuel pump. (Refer to Fuel Delivery System - "Fuel Pump")
2.
Disconnect the electric pump wiring connector (A) and t ...
SS-A Solenoid Valve(ON/OFF) Circuit Diagram
...
Front Strut Assembly Disassembly
1.
Using the special tool (09546-26000), compress the coil spring
(A).
Tightening torque:
58.3 ~ 73.5N.m (6.0 ~ 7.5kgf.m, 43.4 ~ 54.2 ...