|
1. |
Install the control cable (B) and clip (A) on the bracket.
|
2. |
Install the washer (B) and pin (A).
|
3. |
Tighten the nut (B) after install the retainer (A).
|
4. |
Install the cable socket (A) on the shift lever assembly.
|
5. |
Install the shift cable (B) and clip (A).
|
6. |
Shift lever to "3rd".
|
7. |
Install the snap pin (A) after install the select cable (B).
|
8. |
Install the floor console assembly.
(Refer to Body - " Floor Console")
|
9. |
Install the battery and battery tray.
(Refer to Engine Electrical System - "Battery")
|
10. |
Install the air cleaner assembly.
(Refer to Engine Electrical System - "Battery")
|
Parking Brake Lever Installation
1.
Install the parking brake lever assembly (A).
Tightening torque :
19.6 ~ 29.4 N.m (2.0 ~ 3.0 kgf.m, 14.5 ~ 21.7 lb-ft)
...
Components
...
Camshaft Position Sensor (CMPS) Description
Camshaft Position Sensor (CMPS) is a hall sensor and detects the camshaft
position by using a hall element.
It is related with Crankshaft Position Sensor (CKPS) and detects the piston
pos ...