1. |
Remove the floor console assembly.
(Refer to Body - " Floor Console")
|
2. |
Remove the select cable (B) by removing the snap pin (A).
|
3. |
Remove the shift cable (B) after removing the clip (A).
|
4. |
Remove the cable socket (A) from lever assembly after pulling
the cable socket clip in the direction of the arrow.
|
5. |
Remove the retainer (A) after loosen the nut (B).
|
6. |
Remove the air cleaner assembly.
(Refer to Engine Mechanical System - "Air Cleaner")
|
7. |
Remove the battery and battery tray.
(Refer to Engine Electrical System - "Battery")
|
8. |
Remove the shift & select cable.
|
9. |
Remove the shift cable at cabin room.
|
Starter Cleaning
1.
Do not immerse parts in cleaning solvent.
Immersing the yoke assembly and/or armature will damage the insulation
wipe these parts with a cloth only.
...
Airbag Disposal
Special tool required
Deployment tool 0957A-34100A
Before scrapping any airbags or side airbags (including those in a whole
vehicle to be scrapped), the airbags or side airbags ...
Crankshaft Components
1. Crankshaft upper bearing
2. Crankshaft thrust bearing
3. Crankshaft
4. Crankshaft lower bearing
5. Crankshaft position sensor (CKPS) wheel
6. Lower crankcase
7. Gas ...