Kia Forte: Control Shaft Complete Description

Component location : Control shaft assembly is mounted on the top of the manual transaxle

Function : Change the gear by shifting a shift lever.

Control Cable Adjustment

Select cable adjustment 1. Remove the select cable snap pin (A) and then remove the select cable (B) from the shift lever pin. 2. ...

Control Shaft Complete Removal

1. Remove the air cleaner assembly. (Refer to Engine Mechanical System - "Air Cleaner") 2. Remove the battery and battery tray ...

See also:

Engine Coolant Temperature Sensor (ECTS) Installation
   • Install the component with the specified torques. • ...

Removal
1. Disconnect the battery negative cable, and wait for at least three minutes before beginning work. 2. Remove the front seat assembly. ...

Transaxle Oil Temperature Sensor Inspection
1. Turn ignition switch OFF. 2. Disconnect the Solenoid valve connector. 3. Measure resistance between sensor ...