Kia Forte: Control Shaft Complete Removal
Second generation YD (2014-2018) / Kia Forte TD 2014-2018 Service Manual / Manual Transaxle System / Manual Transaxle Control System / Control Shaft Complete Removal
| 1. |
Remove the air cleaner assembly.
(Refer to Engine Mechanical System - "Air Cleaner")
|
| 2. |
Remove the battery and battery tray.
(Refer to Engine Electrical System - "Battery")
|
| 3. |
Set shift lever to "N" position.
|
| 4. |
Separate the control cable from the control shaft after remove
the pin (A) and washer (B).
|
| 5. |
Remove the control shaft assembly after loosen the bolts.
|
Control Shaft Complete Description
Component location : Control shaft
assembly is mounted on the top of the manual transaxle
Function : Change the gear by shifting
a shift lever. ...
Control Shaft Complete Installation
1.
Install in the reverse order of removal.
•
...
See also:
Valve Body Installation
1.
Install in the reverse order of removal.
After replacement or reinstallation procedure of ...
35R Clutch Control Solenoid Valve(35R/C_VFS) Removal
Replacing an on/off solenoid valve (SS-A, SS-B) does not require
additional hydraulic pressure adjustment; however, the ...
Transaxle Oil Temperature Sensor Specifications
▷ Type: Negative Thermal Coefficient(NTC) Type
Temp.[(°C)°F]
Resistance (kΩ)
(-40)-40
48.1
(-20)-4.0
15.6
(0)32.0
...
Copyright © www.kifomanual.com 2014-2024