Kia Forte: Cooling Fan Description
Second generation YD (2014-2018) / Kia Forte TD 2014-2018 Service Manual / Engine Mechanical System / Cooling System / Cooling Fan Description
[Air conditioning type]
The cooling fan operates in 2 stages (HIGH/LOW). The engine control module
(ECM) controls the cooling fan according to the coolant temperature, vehicle
speed and A/C operation.
[Cooling fan operation conditions]
| A/C switch |
A/C pressure [kgf/cm² G (psi G)] |
Vehicle speed [km/h (mph)] |
Coolant temperature [°C (°F)] |
Cooling fan speed |
| OFF |
ㅡ |
V < 45 (28) |
100 ~ 105 (212 ~ 221) |
LOW |
| 105 (221) or above |
HIGH |
|||
| 45 (28) ≤ V < 80 (49.7) |
100 ~ 105 (212 ~ 221) |
LOW |
||
| 105 (221) or above |
HIGH |
|||
| 80 (49.7) ≤ V |
105 (221) or above |
HIGH |
||
| ON |
P < 6 (85.3) |
All |
105 (221) or above |
HIGH |
| 6 (85.3) ≤ P < 12 (170.7) |
V < 45 (28) |
60 ~ 100 (140 ~ 212) |
LOW |
|
| 100 (212) or above |
HIGH |
|||
| 45 (28) ≤ V < 80 (49.7) |
95 ~ 100 (203 ~ 212) |
LOW |
||
| 100 (212) or above |
HIGH |
|||
| 80 (49.7) ≤ V |
105 (221) or above |
HIGH |
||
| 12 (170.7) ≤ P < 15.5 (120.5) |
V < 45 (28) |
-30 ~ 95 (-22 ~ 203) |
LOW |
|
| 95 (203) or above |
HIGH |
|||
| 45 (28) ≤ V < 80 (49.7) |
95 ~ 100 (203 ~ 212) |
LOW |
||
| 100 (212) or above |
HIGH |
|||
| 80 (49.7) ≤ V |
105 (221) or above |
HIGH |
||
| 15.5 (120.5) ≤ P |
All |
-30 (-22) or above |
HIGH |
[Non-Air conditioning type]
The cooling fan operates in 1 stages (HIGH). The engine control module
(ECM) controls the cooling fan according to the coolant temperature, vehicle
speed and A/C operation.
[Cooling fan operation conditions]
| A/C switch |
A/C pressure [kgf/cm² G (psi G)] |
Vehicle speed [km/h (mph)] |
Coolant temperature [°C (°F)] |
Cooling fan speed |
| OFF |
ㅡ |
V < 45 (28) |
100 ~ 105 (212 ~ 221) or above |
HIGH |
| 45 (28) ≤ V < 80 (49.7) |
100 ~ 105 (212 ~ 221) or above |
HIGH |
||
| 80 (49.7) ≤ V |
105 (221) or above |
HIGH |
Cooling Fan Components
1. Cooling fan
2. Fan motor
3. Cooling fan shroud
4. Resister
...
Cooling Fan Specifications
Item
Specification
Fan type
PULLER
Fan speed control
Resistor (HI-LOW-OFF)
Air flow rate [㎥/h (yd³/h)]
1,700 (2,22 ...
See also:
Heater & A/C Control Unit (DATC) Replacement
1.
Remove the audio unit.
(Refer to Body Electrical System - "Audio Unit")
2.
After loosening the mounting screws, remove the ...
Head Lamps Inspection
1.
Check-points upon head lamp failure (HID)
(1)
Check the battery voltage. (Low beam will be on when the
battery voltage above 9V.) ...
Immobilizer Control Unit Removal
1.
Disconnect the negative (-) battery terminal.
2.
Remove the crash pad lower panel.
(Refer to Body - "Crash Pad Lower Panel" ...
Copyright © www.kifomanual.com 2014-2024