1. |
Disconnect the battery "-" terminal.
|
2. |
Remove the air duct and air cleaner assembly.
(Refer to Intake And Exhaust System - "Air Cleaner)
|
3. |
Disconnect the over flow hose (A) from the filler neck.
|
4. |
Loosen the filler neck assembly mounting bolts (A).
|
5. |
Disconnect the fan motor connector (A).
|
6. |
Loosen the variable Intake solenoid (VIS) actuator mounting bolts
(A).
|
7. |
Detach the variable intake solenoid (VIS) valve & bracket after
unfastening the mounting bolt (A).
|
8. |
Disconnect the crankshaft position sensor (CKPS) connector (A)
and the front connector (B).
|
9. |
Remove the cooling fan (A).
|
1. |
Disconnect the wire harness connector (A) and the fan motor connector
(B).
|
2. |
Remove the resistor (A) from the cooling fan shroud.
|
3. |
Install in the reverse order of removal.
|
Camshaft Position Sensor (CMPS) Wave Form
...
Garment Hook Components
(2Door)
1. Garment hook
...
Cooling Fan Inspection
Fan Motor
1.
Disconnect the fan motor connector from the resistor.
2.
Connect the battery voltage to the "+" terminal and ...