Kia Forte: Crankshaft Position Sensor (CKPS) Description

Crankshaft Position Sensor (CKPS) detects the crankshaft position and is one of the most important sensors of the engine control system. If there is no CKPS signal input, the engine may stop because of CKPS signal missing. This sensor is installed on the cylinder block or the transaxle housing and generates alternating current by magnetic flux field which is made by the sensor and the target wheel when engine runs.

The target wheel consists of 58 slots and 2 missing slots on 360 degrees CA (Crank Angle).

Engine Coolant Temperature Sensor (ECTS) Installation

   • Install the component with the specified torques. • ...

Crankshaft Position Sensor (CKPS) Specification

Item Specification Coil Resistance(Ω) 774 ~ 946 [20°C (68°F)] ...

See also:

Front Seat Back Cover Replacement
   • Put on gloves to protect your hands. &n ...

ISG OFF Switch Description
The ISG OFF switch on the crash pad lower panel can be used to deactivate the ISG function. ...

Seat Belt Switch Description
Via the seat belt/Door switch, the ISG function can detect that the driver has fastened the seat belt/door. If the driver has not fastened the seat belt/door, the ISG function reacts as follo ...