|
Mark all wiring and hoses to avoid misconnection.
|
1. |
Remove the engine cover.
|
2. |
Disconnect the battery negative terminal.
|
3. |
Disconnect the wiring connectors and harness clamps, and then
remove the wiring and protectors from the cylinder head and the intake
manifold.
|
4. |
Disconnect the positive crankcase ventilation (PCV) hose (A).
|
5. |
Disconnect the breather hose (A).
|
6. |
Remove the ignition coils.
(Refer to Engine Electrical System - “Ignition Coil”)
|
7. |
Remove the engine oil level gauge.
(Refer to Lubrication System - “Oil Level Gauge & Pipe”)
|
8. |
Remove the cylinder head cover (A).
|
Circuit Diagram
...
Component Location
1. Start Stop Button(SSB)
2. FOB key
3. Smart key unit
4. Interior antenna
5. Trunk antenna
6. Door handle & door antenna
7. Bumper antenna
8. Trunk lid open sw ...
Injector Inspection
1.
Turn the ignition switch OFF.
2.
Disconnect the injector connector.
3.
Measure resistance between the inject ...