Kia Forte: Cylinder Head Disassembly
|
Identify, valves and valve springs as they are removed so that
each item can be reinstalled in its original position.
|
|
1. |
Remove the valves.
|
(1) |
Using the SST (09222-3K000, 09222-3K100), compress the
valve spring and remove the retainer lock (A).
|
When installing the SST, insert the front support
(A) directly into the bolt hole on the cylinder head.
|
|
Do not press valve retainer more than 12 mm (0.47
in.).
|
|
|
(2) |
Remove the spring retainer (B).
|
|
(3) |
Remove the valve spring (C).
|
|
(4) |
Remove the valve (D).
|
|
(5) |
Using needle-nose pliers, remove the valve stem seal (E).
|
Do not reuse the valve stem seals.
|
|
|
Engine removal is not required for this procedure.
•
Use fender covers to avoid damaging pa ...
Cylinder Head
1.
Inspect for flatness.
Using a precision straight edge and feeler gauge, measure the
contacting surface of the cylinder block and the ma ...
See also:
EBD(Electronic Brake-force Distribution)
The EBD system (Electronic Brake force Distribution) as a sub-system of
the ABS system is to control the effective adhesion utilization by the rear
wheels.
It further utilizes the efficie ...
Specification
Audio Unit
Item
Specification
Model
RADIO/CD/MP3 (PA30A)
RADIO/CD/MP3 (UV02)
Power supply
DC 14.4V
Rated Power
43W ...
Schematic Diagram
...
Cylinder Head Removal
Cylinder Head Inspection